Product introduction

No need to drive the control board, it can be started directly after powering on. It is compatible with AC220V and AC380V mains power. It has a rated flow of 50L/min and a lift of ≥26m. It has a minimalist structure and extremely low failure rate. It is suitable for industrial scenarios that do not require automatic speed adjustment and pursue low-cost and stable transportation. The motor still uses a high-efficiency permanent magnet hydraulic solution, and the non-uniform air gap magnetic poles are optimized to reduce operating energy consumption. The entire machine retains core basic protection functions such as stalling, over-current, no water, and over-temperature to prevent dry burning from damaging the pump body. The supporting PQ performance curve shows that the head is stably maintained at more than 28m in the 0-60L/min range, the flow rate decreases gently after exceeding 60L/min, and the power increases linearly with the flow rate without sudden impact. The standardized installation base has precise dimensional tolerances and the inlet and outlet pipe diameters are uniform. It can directly replace the traditional cast iron circulating pump and is easy to modify. It is suitable for large-scale workshop heating circulation, small chemical liquid transportation, injection mold cooling units and other equipment. The uncontrolled structure reduces electronic components and is suitable for harsh workshop environments with dust and large temperature differences. The anti-rust pump chamber is suitable for clean water and glycol coolant. The continuous operation is stable and reliable. It supports batch OEM matching. The inlet and outlet water connectors and installation hole specifications can be adjusted as needed.